|
Wireless
intercom Hotline :
Product details: The Hotline Intercom is ideal for the communication between
two important locations those are required to communicate frequently. The
system has a pair of instruments (two units). Since the system is working
on electric power supply lines, there is no need of any additional wiring
(the transformer and the electric line phases should be the same; if only
your electric phases are different, you can overcome this with using a low
value, non- polarized capacitor between the phases). (If your both transformer
and phases are different, then you can prefer Wired hotline Intercom )
For making a call from one unit to the other, just lift the handset. Now
the other unit will ring. With the lifting of the handset of that unit,
you can communicate each other. The communication through the system is
same as normal telephone. i.e. there is no need to push to talk (it is noted
that, most of the wireless products available in the market are “push talks”).
You will get a range of up to 2KM (6000 ft.) in a less loaded rural area
on same electric phase. In a noise free, straight electric cable, you can
get more than two kilometers. In a low population areas like estates, forest
etc, the system can get a range of 4 to 5 kilometers.
Installation: Installation of the system is very simple. Just insert the
AC power cord pins of the units in to the 110/230-volt AC power supply outlets.
Now the system is ready for operation.
wireless Call Transferring Intercom
:
Installation: Installation of the POWERFONE Intercom systems are very simple.
Just insert the AC power cord pins of the Intercom units into the 110/230-volt
AC outlets in the required places, now the system is ready for operation.
About the system: The system can use in both ways as a hot line and also
you can transfer the incoming telephone call from the main unit to the sub
unit. The system has a pair of instruments (two units). Since the system
is working on electric power supply lines, there is no need of any wiring
(the transformer and the electric line phases should be the same; if only
your electric phases are different, you can overcome this with using a low
value, non- polarized capacitor between the phases). 110 and 230V AC models
are available. The communication through the system is same as normal telephone.
i.e. there is no need to push to talk (it is noted that, most of the wireless
products available in the market are “push talks”). You will get a range
of up to 2KM (6000 ft.) in a less loaded rural area on same electric phase.
In a noise free, straight electric cable, you can get more than two kilometers.
In a low population areas like estates, forest etc, the system can get a
range of 4 to 5 kilometers. (If your transformer and phases are different,
then you can prefer Wired call transferring Intercom)
Installation: Installation of the system is very simple. Connect the telephone
line cord of the main unit to the telephone line and then, insert the AC
power cord pins of the units in to the 110/230-volt AC outlets. Now the
system is ready for operation.
Operation of the Intercom: For making a call from one unit to the other,
just lift the handset. Now the other unit will ring. With the lifting of
the handset of that unit, you can communicate each other.
Call transferring operation: If the call transferring switch is enabled
in the main unit, the both your telephone and the sub unit (extension) will
ring with an incoming telephone call. If the call-transferring switch is
disabled, and if you wanted to transfer an incoming call to the sub unit,
then lift the handset of the main unit, now the sub unit will ring. When
the person who lifts the handset of the sub unit and press the "call transfer
button" in his unit, the call will be transferred to the sub unit. The communication
through the system is same as normal telephone. i.e. there is no need to
push to talk.
Wireless Master Slave Apartment Interphone:
Product details: In this unique Master-Slave Intercom system, you can use
up to 1000 number of slaves with one master unit. The system is working
on electric power lines. In a less loaded rural area, you can get up to
2KM (6000 ft.) operation range (the transformer and the electric line phases
should be the same). If your transformer and the electric phases are different,
then you can prefer wired model. You can also transfer incoming telephone
calls from the master to any slaves (this model has a little extra cost).
Installation: Installation is very simple. Just insert the AC power cord
pins of the intercom units (master and slaves) in to the AC outlets in the
required places (and connect the telephone cord of the master unit to the
telephone line if you prefer the call transferring model), now the system
is ready for operation.
Intercom operation: You can dial to the required slave unit from the master
unit, now the dialed slave unit will ring. With the lifting of the handset
of the slave unit, you can communicate each other. Conversation in the system
is same as normal telephone. i.e. there is no need of "to push to talk"
like many of the intercom systems. If you want to communicate with the master
unit from a slave unit, just lift the handset of the slave unit, now the
master unit will ring and with the lifting of the handset of the master
unit, you can communicate each other. Since the slave units have no inter
dialing facility, it is not possible to communicate between the slaves.
If you want to communicate between the all units, then you can prefer the
Multi line Intercom.
Call transferring operation: If you wanted to transfer an incoming telephone
call to a slave unit, dial the required slave number, now the slave will
ring, when the person who lift the handset of the slave and press the call
transferring button, the call will be transferred to the slave.
The master- slave system is very useful for a wide range of applications:
Communication between operator and persons in the elevators in an large
building, between the main gate (gate security) and the homes in a housing
colony, between main gate and homes in a large apartment, flats, villas
etc., between the supervisor and workers in a mine, between supervisor and
employees in a factory, in a shopping complex, hospitals, hotels, Banks,
lodges, supermarkets etc.
Cordless
EPABX, Cordless Multi Channel Intercom:
Product details: In this multi-line system, you can use up to 16 lines (16
number of units). You can dial and communicate between every of the units
each other. Each of the system has a two-digit number like 11, 12, 13, 14
etc. The system is working on electric power lines and so there is no need
of any wiring (transformer and electric phases should be the same). You
will get up to 100 meter of operating range in the same electric phase.
Every unit has its own unique transmission frequency and are using security
code with frequency multiplexing technology, you can use 8 pair of units
at the same time without any overhearing or mingling the conversations.
You can also transfer incoming telephone calls to any one of the unit (optional)
(if your transformer and electric phases are different, then you can prefer
Wired multi line Intercom )
Installation: Installation of the system is very simple. Place the units
in their locations and insert the AC power cord pins of the units in to
the AC outlets. Now the multi-line intercom system is ready for operation.
Operation: For making a call, lift the handset, listen for dial tone and
dial the required number; now the dialed unit will ring. When the person
lifts the hand set, you can communicate each other.
Ideal for : Multistory Buildings, Hospitals, Banks, Factories, Offices,
Apartments, Multistoried homes, Lodges etc.
Cordless Call Dialing Interphone
:
Product details: The system can use as hotline and telephone extension.
You can transfer incoming telephone calls from the main unit to the sub
unit and also make out going (dial) calls from the sub unit. If you are
having two telephone connections in near by locations, you can disconnect
one connection. The system has a pair of instruments (two units). Since
the system is working on electric power supply lines, there is no need of
any wiring (the transformer and the electric line phases should be the same).
You will get a range of up to 2KM (6000 ft.) in a less loaded rural area
on same electric phase. In a noise free, straight electric cable, you can
get more than two kilometers. In a low population areas like estates, forest
etc, the system can get a range of 4 to 5 kilometers. (If your transformer
and phases are different, then you can prefer Wired system)
Installation: Installation of the system is very simple. Place the units
in its locations and insert the AC power cord pins of the Intercom units
in to the 110/230V AC outlets. Connect the telephone cord of the main unit
to the telephone line (the main unit is installed near the telephone line).
Intercom operation: For making a call from one unit to the other, just lift
the handset. Now the other unit will ring. With the lifting of the handset
of that unit, you can communicate each other.
Call transferring operation: If the call transferring switch is enabled
in the main unit, the both your telephone and the sub unit (extension) will
ring with an incoming telephone call. If the call-transferring switch is
disabled, and if you wanted to transfer an incoming call to the sub unit,
then lift the handset of the main unit, now the sub unit will ring. When
the person who lifts the handset of the sub unit and press the "#” button
in his unit, the call will be transferred to the sub unit.
Dialing from the extension: If you want to make a telephone call from the
sub unit, lift the handset, press '#' button; now you will hear the dial
tone from the telephone line and then you can dial to the required number.
The communication through the system is same as normal telephone. i.e. there
is no need to push to talk.
Wired Multi-channel Intercom
Product details: You can use up to 16 lines (16 number of units) in this
multi-line system. You can make calls and communicate between every of the
units. Each of the units has a two-digit number like 11, 12, 13, 14 etc.
The signals (transmitting and receiving) between the units are passing through
a pair of low gauge wires (only a parallel wiring between the all units
are required). Since we are using wire for sending and receiving signals
between the units, you will get digital clarity conversation and also, get
up to 2 km of operating range. Each unit has their own unique transmission
frequency and are using security code with frequency multiplexing technology,
you can use 8 pair of units at the same time without any overhearing or
mingling the conversations. You can also transfer incoming telephone calls
to any one of the unit (optional). [if you have any difficulty to install
wire between the locations, then you can prefer Wireless multi line Intercom]
Installation: Install a pair of wires in parallel between the locations.
Place the units in the locations and connect the signal wires (a pair of
wires) from the units to the pair of wires that installed. Insert the AC
power cord pins of the units in to the AC outlets. Now the multi-line intercom
system is ready for operation.
Operation: For making a call, lift the handset, listen for dial tone and
dial the required number; now the dialed unit will ring. When the person
lifts the handset, you can communicate each other.
Ideal for : Multistory Buildings, Hospitals, Banks, Factories, Offices,
Apartments, Multistoried homes, Lodges etc
wired Hot line intercom
Features
● Only need to install a single wire between the two locations ●Digital
clarity conversation ● Different Channels ● Different Security Codes ● Long
Range (up to 80KM) ●FM Technology ● Both way Communication (no push to talk)
● Loud and pleasant ringing ●Both party ring cut off system ● Light weight
handset ● No mechanical switch (hook switch) ● Simple operation ● Wall -
mountable ● Original Ring Back Tone ● working in 90~250V AC ● One Year Warranty.
Ideal for :
Office - home, Home - Shop, Shop - Godown, Hospitals, Banks, Factories,
Between two distant locations that can able to connect through wire.
Product details: The Hotline Intercom is ideal for the communication between
two important locations those are required to communicate frequently. The
system has a pair of equipments (two units). The signals between the units
are passing through a wire (only a low gauge single wire is required). Since
we are using a wire for exchanging signals between the units, it will provide
digital clarity conversation and also up to 80km of transmission rage. For
making a call from one unit to the other, just lift the handset. Now the
other unit will ring and with the lifting of the handset of that unit, you
can communicate each other. The communication through the system is same
as a normal telephone, i.e. there is no needs to ‘push to talk’ like many
of the brands. If you have any difficulty to install wire between the locations,
and if you have the same transformer and same electric phases, then you
can prefer Wireless hotline Intercom
Installation: Install a single wire between the locations where the units
to be placed. Then, place the units at its locations and connect the signal
wires from the units to the installed wire. Insert the AC power cord pins
of the units in to the 110/230-volt AC outlets. Now the system is ready
for operation.
● Cordless Operation ● Works on 90~250V AC Power
line ● Different Channel ● Different Security Code ● Long Range
(up to 2KM (6000 ft.)) ● Up to 16 Lines ● FM Technology
● Both way Communication ● Original Ring Back Tone
●110 Volt, 230Volt Models ● One Year Warranty
Cordless
Hotline Intercom :
You can communicate between two station without any wiring. This is both
way communication like telephone, no like "push to talk" low cost one way
wireless intercom. Range up to 2KM (6000 ft.). (only in rural area
on same phase)
Features:
■ Cordless Operation ■ Works on 90~250V AC power line ■ FM technology
■ Different channel and Different security code ■Both way communication
■Original ring back tone ■Loud and pleasant telephone type ringing
■ Both party ring cut off system ■ Light weight hand set ■
No mechanical switch (hook switch) ■ Simple operation
■ Easy Installation ■ Wall - mountable Price: Rs-2050.00,
$52.00 (per pair)
Ideal for :
Houses to Shops, Houses to Offices, Shops to Godown, Hospitals, Banks, Factories,
etc.
Cordless Call Transferring Intercom :
You can communicate between two station without any wiring. Also transfer
telephone call. Range up to 2KM (6000 ft.). (only in rural area on same
phase)
Features:
■ Cordless Operation ■ Works on 90~250V AC power line ■ FM technology ■
Different channel and Different security code ■ Both way
communication ■ Original ring back tone ■ Loud and pleasant telephone
type ringing ■ Both party ring cut off system ■ Light
weight hand set ■ No mechanical switch (hook switch)
■ Simple operation ■ Easy Installation ■ Wall - mountable
Price: Rs 2620.00, $66.00 (per pair)
Ideal for :
Houses to Shops, Houses to Offices, Shops to Godown, Hospitals, Banks, Factories,
etc.
Cordless Call Dialing Interphone :
You can communicate between two station without any wiring. Also transfer
telephone call with Dialing facility. Range up to 2KM (6000 ft.). (only
in rural area on same phase)
Features:
■ Cordless Operation ■ Works on 90~250V AC power line ■ FM technology ■
Different channel and Different security code ■ Both way
communication ■ Original ring back tone ■ Loud and pleasant telephone
type ringing ■ Both party ring cut off system ■ Light
weight hand set ■ No mechanical switch (hook switch)
■ Simple operation ■ Easy Installation ■ Wall - mountable. Price:
Rs 3120.00, $79.00 (per pair)
Ideal for :
Houses to Shops, Houses to Offices, Shops to Godown, Hospitals, Banks, Factories,
etc.
Cordless
Master Slave Interphone:
You can communicate between master and slaves, but no between slaves (Slaves
up to 1000 numbers). Also transfer telephone call with dialing facility
(optional). Range up to 2KM (6000 ft.). (only in rural area on same phase)
Features:
■ Cordless Operation ■ Works on 90~250V AC power line ■ FM technology ■
Different channel and Different security code ■ Both way
communication ■ Original ring back tone ■ Loud and pleasant telephone
type ringing ■ Both party ring cut off system ■ Light
weight hand set ■ No mechanical switch (hook switch)
■ Simple operation ■ Easy Installation ■ Wall - mountable
Price for Master
Rs1960.00, $49.00. For each slaves Rs1030.00, $26.00
Ideal for : Houses, Multistory Building, Apartments, Multistory house,
Lodges, Houses to Shops, Houses to Offices, Shops to Godown, Hospitals,
Banks, Factories, etc.
Cordless EPABX, Cordless Multi Channel Intercom:
You can communicate between all extension up to 16 lines. Each set have
two digits number like 11, 12, 13 etc. For using lift hand set, hear the
dial tone and dial wanted number, then you can hear ring back tone, now
can communicate. All sets are using different frequency and deferent security
code with frequency multiplexing technology. So you can communicate 8 pairs
at a time without overhearing or mingling. Also transfer telephone call
with dialing facility (optional). Range up to 100M with out any cabling
on same electrical phase, range up to 2KM (6000 ft.) on separate single
pair parallel cabling.
Ideal for : Multistory Building, Apartments, Multistory house, Lodges,
Houses to Shops, Houses to Offices, Shops to Godown, Hospitals, Banks, Factories,
etc.
WhatsApp,
Viber : +91 9447034020, Skype: thodukonics
●
What is wireless
Intercom?
●
Diagram of wireless intercom systems !
●
PC Based Oscilloscope
●
Guest Book
●
e-mail: email@thodukonics.com
|
